Product Code Database
A bass amplifier (also abbreviated to bass amp) is a musical instrument electronic device that uses electrical power to make lower-pitched instruments such as the bass guitar or double bass loud enough to be heard by the performers and audience. Bass amps typically consist of a preamplifier, tone controls, a power amplifier and one or more ("drivers") in a cabinet.
While bass amps share many features with the used for electric guitar, they are distinct from other types of amplification systems, due to the particular challenges associated with subwoofer. This distinction affects the design of the , the size and design of the speaker cabinet and the design of the preamplifier and amplifier. Speaker cabinets for bass amps usually incorporate larger loudspeakers (e.g., speakers are more common for bass than for electric guitar amps) or more speakers and larger cabinet sizes than those used for the amplification of other instruments. The loudspeakers themselves must also be sturdier to handle the higher power levels and they must be capable of reproducing very low pitches at high sound pressure levels.
In 1933, the Audiovox Manufacturing Company was founded by Paul Tutmarc, subsequently the inventor of the first electric bass, the fretted and solid-body Audiovox Model 736 Bass Fiddle, in 1936, which was designed to be played in a guitar-like horizontal manner. The instrument was sold with the first purpose-built bass amplifier, the Audiovox Model 936. Seen largely as a novelty, the few that were sold remained in the Seattle area.
Leo Fender resurrected the solid-body "bass guitar" in 1950 with the Fender Precision bass. Unlike the upright bass, a solid-body electric bass does not produce acoustic sound from a hollow body; while an upright bass player often benefits from using a bass amp, a bass amp is a necessity for an electric bass player.
By the late 1960s, as electric guitarists in rock bands began using powerful amplifiers to play large venues, bassists needed to keep up. The Acoustic 360 was a "200-watt, solid state head designed to drive the 361 cabinet, a rear-firing 18" speaker enclosure". The engineers who designed the amp and cabinet in 1967, Harvey Gerst and Russ Allee, mounted the 18" speaker in a folded horn enclosure; the 360 amp had a built-in fuzz bass effects unit. The Acoustic 360 and its 361 cabinet "...got the bass world ready for the Woodstocks, Altamonts and giant festival concerts" and it was used by notable players such as funk bassist Larry Graham, Led Zeppelin's bassist John Paul Jones and jazz fusion player Jaco Pastorius. John Paul Jones used two of the amp/cabs in Led Zeppelin; Dave Brown used them with Santana; John McVie played with the amp/cab in the beginning years of Fleetwood Mac. In December 1967, the loud sound of the Acoustic 360 led to The Doors getting "...arrested for noise violations".
Another 1960s-era amp and speaker that was used for loud, large venue performances was the Ampeg SVT (Super Vacuum Tube), a 300-watt amplifier head "powered by fourteen vacuum tubes" designed to be used with an 8x10" speaker cabinet.
The Vox T-60/AC-100 bass amplifier uses two 15-inch cabinets and thirty-to-forty watts of solid-state power using "germanium transistors". The Sunn Model T was used by The Moody Blues, Kiss, Queen, The Who's John Entwistle and Rush's Geddy Lee. The Sunn used a 150-watt amp with "four 12AX7WA tubes, followed by two 12AX7A tubes, and powered by four 6L6GC tubes".
The Gallien-Krueger 800RB was a solid state bass amplifier head introduced in 1983 that was liked by bassists for its loud, clean sound and durable construction. It introduced the concept of bi-amplification, as it sent 300 watts of low register sound to the bass speakers and 100 watts to the tweeter. The GK used a tube preamp simulator circuit called "boost". GK 800RB users include Red Hot Chili Peppers bassist Flea and Guns N' Roses' Duff McKagan.
The Marshall JMP Super Bass is a 100 watt amp. Lemmy, bassist/lead singer of Motörhead, used numerous of these amps to drive cabinets with four 12" speakers and others with four 15" speakers. His amps were labelled named "Killer," "No Remorse," and "Murder One". The Peavey Mark IV is a large, solid-state amp providing 300 watts at 2 ohms; the Mark IV was known for its affordable price and its reliability.
Fender developed a bass amplifier, the Fender Bassman, first produced in 1952. This was a 26-watt tube amplifier with a single 15" speaker. In 1954, the Bassman was redesigned to use four 10" speakers. This speaker cabinet was an open-back design; as such, it had poor low-frequency efficiency and was prone to blowing speakers when used for bass because of the lack of damping. The Bassman became very popular as an electric guitar amplifier. The circuit design also underwent repeated modifications. The "5F6A" circuit introduced in 1958 is regarded as a classic amplifier design and was copied by many other manufacturers, such as Marshall.
The early rock bands of the 1960s used the PA system only for vocals. The and had to produce their sound for the hall, club or other venue with their own amplifiers and speaker cabinets. As a result, bass players from the 1960s often used large, powerful amplifiers and large speaker cabinets. Some bass players would even use multiple bass amplifiers, with the signal from one bass amp being sent to one or more "slave" amps. In the mid-1960s John Entwistle (The Who) was one of the first major players to make use of Marshall stacks. At a time when most bands used 50- to 100-watt amplifiers with single cabinets, Entwistle used twin stacks with new experimental prototype 200-watt amplifiers. This, in turn, also had a strong influence on the band's contemporaries at the time, with Jack Bruce of Cream and Noel Redding of the Jimi Hendrix Experience both following suit.
Entwistle also experimented throughout his career with "bi-amplification," where the higher frequencies of the bass sound are divided from the lower frequencies, with each frequency range sent to separate amplifiers and speakers. This allows for more control over the tone, because each portion of the frequency range can then be modified (e.g., in terms of tone, added overdrive, etc.) individually. The Versatone Pan-O-Flex amplifier used a different approach to bi-amplification, with separate amplifier sections for bass and treble but a single 12-inch speaker. The Versatone was used by well-known bassists such as Jack Casady and Carol Kaye.
Grateful Dead bassist Phil Lesh used an unusual method of bass amplification which was part of the band's 1970s Wall of Sound (Grateful Dead) PA system. The signal from each string on the bass was sent to its own amplifier and speakers. This added a wider spatial effect to the bass and also reduced the Intermodulation distortion between the strings. In later years, Lesh's bass signal was so powerful that fans dubbed the area in front of his speakers the Phil Zone, which was referenced in the band's CD Fallout from the Phil Zone.
As PA systems improved, horn-loaded "bass bins" and subwoofers were added and were often well-equipped to amplify directly fed bass guitar and keyboard frequencies. As well, in the 1980s and 1990s, monitor systems were substantially improved, which allowed sound engineers to provide on-stage musicians with a loud, clear, and full-range reproduction of their instruments' sound.
As a result of the improvements to PA systems and monitor systems, bass players in the 2000s no longer need to have huge, powerful bass amplifier systems to play stadiums and arenas. Instead of playing with two 8x10" bass stacks and one or more huge, powerful bass heads, in the 2010s, many bass players perform at large live venues with relatively small and less powerful bass amplifiers. The reason they can do so is that most higher-priced 2010s-era bass amplifiers usually have DI box jacks that can be patched into the audio snake cable, and then plugged into the mainstage mixing board and amplified through the PA system or sound reinforcement system.
In the 2010s, virtually all of the sound reaching the audience in large venues comes from the PA system or sound reinforcement system, the huge speaker systems pointed at the audience. As well, in the 2010s on-stage instrument amplifiers are more likely to be kept at a low volume, because when band members have their onstage amps "cranked" to high volume levels on stage, this makes it harder for the audio engineer to control the sound mix and blend. For example, if a heavy metal bassist had two 8x10" cabinets and several 1x18" subwoofer cabinets and several thousand watts of bass amplifier heads, and these amps are set to a very high volume level, this bass player will be creating very significant onstage bass volume. If the sound engineer wished to turn down the bass in the PA/sound reinforcement system, this bassist's loud onstage volume would make it hard for this engineer to control and/or reduce the volume of bass in the FOH (Front of House) sound mix. Another issue that can develop with bass players who have very high onstage volume is that it can be hard for the audio engineer to produce a clean sound through the PA/sound reinforcement system. For example, if a bassist was driving his bass amp speaker stacks into clipping to create a fuzz bass tone, if the audio engineer wished to have a "clean" bass sound, this could pose a challenge.
As a result of requests by audio engineers to reduce onstage volume, in the 2010s, in many large venues. much of the on-stage sound reaching the musicians now comes from the monitor speakers or in-ear monitors, not from the instrument amplifiers. Stacks of huge speaker cabinets and amplifiers are still used in concerts in some genres of music, especially heavy metal, but they tend to be used more for the visual effect than for sound reproduction.
In some small to mid-size venues, such as bars and nightclubs, the PA system may not have the capacity to provide the bass sound for the venue, and the PA system may be used mainly for vocals. Bass players in bands that play at a variety of venues, including these types of small to mid-size venues, may need to be able to provide the bass sound for the venue, and so they will require a large combo amp or bass stack with this capability.
Some playing on the street for gratuity may use battery-powered practice amps, a feature available on some models.
Practice amps may have an auxiliary line-in jack, allowing a CD player or electronic metronome to be mixed into the output for practice purposes. As well, there is often a headphone output jack.
Higher-priced practice amps may have a DI box, so that the preamplifier signal can be connected directly to a audio console for a live show's sound reinforcement system or for a sound recording session. DI out-equipped units effectively turn the practice amp into a preamplifier unit.
Bass players in quieter, more acoustic genres may be able to use smaller, more modestly powered combo amps. Bassists who play in genres more associated with a high stage volume (e.g., hard rock or electric blues) may tend to use, larger, more powerful (in wattage) combo amps.
A bass stack may use a single speaker cabinet, e.g., a cabinet holding eight ten-inch speakers, or 8x10". Smaller speaker cabinets with one, two, or four speakers are more commonly used, because while the 8x10" cabinet is able to produce huge volume and powerful bass tone, the cabinets are very heavy and difficult to transport. Some single cabinets use mixed speaker sizes. Examples include MESA Engineering's 1x15"/4x10" cabinet, Peavey's PVH 1516, which has 1x15" and 2x8" speakers. and Traynor's TC1510 combo, which has 1x15" and 2x10".
Large cabinets with speaker sizes other than 10", 12" or 15" are less commonly used. Examples include the 6x8" and 8x8" cab configurations. One reason that some bass players choose to use a "bass stack" rather than a combo is that the separate component approach enables bassists to use different speaker cabinets for different shows or activities. For example, a bassist playing a stadium may use an 8x10" cab for this show, but then bring a 4x10" cab for a nightclub show the next day, or a 1x12" cab for a studio recording.
Large speaker cabinets may have attached lifting handles and dolly wheels to facilitate transportation.
Speaker cabinets with 1/4 input jacks typically have two parallel jacks, so that the amp head may be plugged into one cabinet, and then a second cabinet can be "daisy chained" by connecting it to the first cabinet. Cabinets with horn-loaded tweeters often have an attenuator knob for controlling the tweeter.
Bass cabinets have thicker wood panels than electric guitar amps, and often have stronger internal bracing. This reduces the likelihood of unwanted cabinet buzzes or rattles, which are more likely with bass cabinets due to the lower sound frequencies output.
"Open back" bass speaker cabinets are uncommon, because the configuration increases difficulty in clearly reproducing low-frequency tones.
If a player uses a separate preamplifier and power amplifier, she or he can buy a power amplifier intended for a sound reinforcement system or PA system or pick a power amplifier designed specifically for bass instruments. These preamps and power amps come in two formats: 19 inch rack-mountable units and units with their own wood or metal case. If a player uses a rackmountable preamp and power amp, these units and any effects unit, such as an , can be mounted in 19" rack mount road cases. The "bass stack" approach gives the bassist opportunity to customize the rig, mixing various models and brands of preamplifier, graphic equalizer, power amplifier and speaker cabinets as desired. As well, a failing component can be individually replaced without taking the entire rig out of service, as would occur with a combo amplifier.
Some professional-grade amp heads, such as Ampeg's SVT400-PRO, have an audio crossover, an electronic filter that splits the bass signal into a low-pitched signal (which could be routed to a cabinet suited for low-pitched sounds, such as a 1x15" or 2x15" cabinet), and the middle and high frequencies to a different cabinet suited to this register (e.g., a 2x10" or 4x10" cabinet with a horn-loaded tweeter). Amps with a crossover can either have a single crossover point pre-set at the factory (e.g., 100 Hz) or a knob is provided to enable the bassist to select the frequency where the bass signal is split into low and higher-pitched signal. Amps with an adjustable crossover point can enable bassists to fine-tune their speaker output for a particular venue.
Even though tube amplifiers produce more heat than solid state amplifiers, few manufacturers of tube amplifiers include cooling fans in the amplifiers' chassis. Usually adequate cooling is provided by passive convection. Adequate airflow is needed to prevent excessive heat from shortening the tubes' lifespan or producing tonal inconsistencies.
Tube amplifiers require more maintenance than solid state transistor amplifiers, such as replacing vacuum tubes and electrolytic capacitors. Tube amplifiers are usually heavier than an equivalently powered transistor amplifier. As tubes are made of glass, tube amplifiers are more fragile than a solid state amp.
The output transistors of solid state amplifiers can be passively cooled by using metal fins called heat sinks to radiate away the heat. For high-wattage amplifiers, a fan is often used to move air across internal heatsinks.
In a band, the bassist will typically need three or four times the wattage of the electric guitarist. While an electric guitarist will often find that a 50 watt amp will be adequate for rehearsals and mid-size performance venues, a bass player performing alongside them will typically need at least a 300 watt bass amp, six times the power of the electric guitar amp, to get a good bass volume. "More advanced players who regularly gig in small to medium sized venues… typically use produce 300-700 watts of output." Some bassists believe a tube bass amp will sound louder than a solid-state bass amp of the same wattage.
Most amps are designed to work for a single voltage. A small number of expensive bass amps designed for touring professionals have user-selectable voltage, which enables a bassist to use same amp in both North America and across Europe.
A small number of small combo amps can run on both AC mains power and battery power. This enables bassists to play outside where there is no access to power (e.g., for busking on the street). Amps that are battery powered may have a 12-volt input, so that it can be connected to a car battery with alligator clips.
For 10" speakers, the most common combo amp and speaker cabinet configurations are 2x10" and 4x10". For speaker cabinets, 2x10" and 4x10" are the most widely used, although 8x10" cabinets are used in stadium concerts, especially in louder rock genres. Other configurations with 10" speakers do exist, but they are less common. For example, there are a small number of 1x10" and 3x10" combo amps and speaker cabinets, and a small number of 6x10" cabinets. Bass speakers are usually made with stiff paper cones. Hartke combo amps and speaker cabinets are unique in that the cone is made from paper, except for the middle, which is made of aluminium. Gallien-Krueger's MB210-II combo amp uses ceramic speakers.
On the smaller end of the speaker spectrum, some small practice combo amps have 1x3", 2x5", 1x6.5", and 1x8" speakers.
Many manufacturers abbreviate the number and size of speakers in the name of their equipment. A cabinet with two 10" speakers may be called a "210".
Another abbreviation that is used is to add the wattage to the name, so a 500-watt Yamaha combo amp with two 12" speakers may be called the "Yamaha 212-500".
Bassists who want a more powerful low end may use a subwoofer cabinet. Subwoofers are specialized for very-low-frequency reproduction, with typical maximum useful high frequencies of about 150 or 200 Hz, so a subwoofer cabinet must be paired with a full range speaker cabinet to obtain the full tonal range of an electric bass or upright bass. Bass guitar players who use subwoofer cabinets include performers who play with extended range basses with include notes between B0 (about 31 Hz); and C#0 (17 Hz) and bassists whose style requires a very powerful sub-bass response is an important part of the sound (e.g., funk, Latin, gospel, R & B, etc.).
Keyboard players who use subwoofers for on-stage monitoring include Hammond organ players who use bass (which go down to a low "C" which is about 33 Hz) and synth bass players who play rumbling sub-bass parts that go as low as 18 Hz. Of all of the keyboard instruments that are amplified onstage, synthesizers produce some of the lowest pitches because, unlike a traditional electric piano or electric organ which have as their lowest notes a low "A" and a low "C", respectively, a synth does not have a fixed lowest octave. While performers who use concert sound subwoofers for onstage monitoring may like the powerful sub-bass sound that they obtain, sound engineers may find this problematic, interfering with the "Front of House" sub-bass sound.
Most bass speaker cabinets employ a vented bass reflex design, which uses a port or vent cut into the cabinet and a length of carefully measured tubing or pipe to increase the low-frequency response and improve the speaker system's efficiency.
Less commonly, some bass speaker cabinets use one or more passive radiator speakers, a "drone cone" lacking a voice coil, which is used in addition to a regular woofer to improve the low-frequency response of a cabinet. Passive radiator speakers help to reduce the risk of overextension.
Acoustic suspension designs with sealed cabinets are relatively uncommon because they are less efficient. Some cabinets use a transmission-line design similar to bass-reflex, and in rare cases, some large cabinets use horn-loading of the woofers (e.g., the Acoustic 361 18" speaker cabinet from the late 1960s).
Most bass combo amps and bass speaker cabinets are "front-firing," where the speakers and horn (if present) aim forward. However, because very-low-pitched sounds are , some combos and cabinets have that point down or to the rear, as do many designs of home cinema subwoofer cabinets. The deep bass tone radiates from the cabinet in all directions.
Bass combo cabinets and speaker cabinets are typically cube- or rectangle shaped. Some small- to mid-sized combo amp cabinets have a wedge shape, like a keyboard amp or a stage monitor speaker cabinet. The wedge shape, also called a "rock back" feature, enables a bassist to point their speakers up towards themselves, to make it easier to hear their sound.
In the early 1980s, some performers began using two-way or three-way cabinets, with 15" woofers, a vented midrange driver and a horn/driver, with an audio crossover directing the signal to the appropriate driver. Folded-horn bass guitar rigs have remained rare due to their size and weight. As well, since the 1990s, most clubs have PA systems with that can handle the low range of the bass guitar. The more common use of tweeters in traditional bass guitar amplifiers in the 1990s helped bassists to use effects and perform more soloistic playing styles, which emphasize the higher range of the instrument.
Horns and speakers in the same cabinet are sometimes wired separately, so that they can be driven by separate amplifiers. Biamplified systems and separately-wired cabinets allowed bassists to send an overdriven low-pitched sound to the speaker, and a crisp, undistorted high-pitched sound to the horn.
Since the 1960s, some bassists have obtained a similar result by plugging their bass into both an electric guitar guitar amp and a bass amp. This approach does not use a crossover, but since an electric guitar amp will only produce pitches down to about 80 Hz, the guitar amp reproduces the mid- to high frequencies and the bass amp reproduces the low frequencies. With this arrangement, distortion and other effects can be applied to the guitar amp without affecting the solidity of the bass amp tone.
Some bass amplifier combos have a "whizzer cone" attached to the low-frequency woofer's centre. The whizzer cone is about the same size as a dust cap, although it resembles a miniature speaker cone. This handles the upper frequencies that are too high for the woofer.
Guitar amplifier are more likely than bass amps to have multiple "channels", but some bass amps also have channels. By providing two or more "channels", each with its own gain, equalization and volume knobs, a bassist can preset various settings (e.g., an accompaniment setting for playing a backing part and a solo bass setting for playing a guitar solo). In a heavy metal band, a bassist may use a multi-channel amp to have one setting with an aggressive overdrive, while another channel has a "clean" sound for . On some amps, setting the "gain" or "drive" control above a certain setting causes an fuzz bass, either due to the natural effect of overloading the preamplifier (or the preamp tube on a tube amplifier) and/or due to a distortion Effects unit being turned on. typically also have a "standby" switch in addition to an "on/off" switch. Controls are typically mounted on the front of the amplifier near the top of the cabinet; often the knobs are recessed so that they do not project beyond the wooden cabinet, to protect the knobs during transportation. On amplifier "heads", protective metal U-shaped protrusions may be used to protect the knobs during transportation. On some amps, notably Roland models, the knobs and switches may be on top of the amplifier, at the rear of the top surface. Again, the knobs are usually recessed below the top of the wooden cabinet to protect them.
Mid-to high-priced amps may have other switches (which on some amps are switched on by pulling an existing rotary knob out) that boost or cut some part of the frequency range, such as "bright boost", "deep boost" or "mid scoop" switches. Amps with an onboard audio compressor or limiter, which is used to protect the speakers from sudden peaks in volume and from damage due to power amplifier clipping, may have only an on/off switch to turn on the effect (as with lower- to mid-priced amps), or they may have one or more knobs to control how much compression is applied to the bass tone (typically a ratio and threshold knob or just a single knob). Some 2000s-era amps may have an electronic tuner and a mute button, to mute the sound of tuning during a break between songs without having to change the volume settings. On some amps, vertical sliders may be provided to control a graphic equalizer, which gives the bassist control over a number of frequency bands.
Higher-cost amps for professionals with an XLR connector DI box jack may also have a "ground lift" switch (to be used in case of a humming ground loop), a DI out level control knob, and a switch which determines whether the DI out signal to the PA or recording mixing board is pre- or post- the amp's internal preamplifier and equalization circuitry. The pre-/post- switch enables a bassist to decide whether to send the audio engineer just the signal from her bass, or to send the signal once it has been pre-amped and equalized by her amp settings. Some higher-cost amps may have a parametric equalizer (or a semi-parametric equalizer) for some frequency ranges (typically the middle frequency range), which can be used to modify the bass tone to suit different styles or performance venues. Some bass amps have a 15 or 20 dB pad which can be used to attenuate "hot" signals, such as basses with an internal preamplifier (depending on the model of amplifier, some brands may provide two inputs (high and low gain) instead of providing a "pad". This pad can be turned on using a button. Some bass amps have an even stronger pad, a 40 dB pad.
Some bass amps may have additional controls for onboard bass effects such as bass chorus or a knob for controlling a multi-effects unit (which might include a suboctave generator, Chorus effect, reverb, fuzz bass etc.). Some 2000s-era amps may have a knob to control digital amp or speaker emulation settings (e.g., emulating the tone of a huge 8x10" speaker stack or a vintage tube amp by famous makers, such as the Ampeg SVT).
Lower-priced amps may have a preamp out. Bass amps intended for use by professional players may have an DI box so that the amp can be connected directly to a mixing board of a PA system or recording set-up. Some bass amps have a 1/4" headphone out jack, so that the bass amp can be used for silent practice. When the headphone is plugged in, the amplifier to the speaker is normally automatically turned off. Higher-priced amps designed for professionals often have "preamp out" and "power amp in" jacks, which can be used to make an effects loop. The power amp in jack can also be used to plug in an external preamplifier pedal, which would then bypass the amp's onboard preamp and EQ section. Some bass amps have an auxiliary in jack, for plugging in a drum machine, keyboard bass or synthesizer. Some bass amps also have an external speaker out jack.
On some amps with a number of input and output jacks, the jacks may be consolidated in a patch bay. Some amps have an input jack for a foot-operated switch which can be used to turn on an effect or switch to a solo channel. Some amplifiers have a "tuner out" jack, for sending the instrument signal to an external electronic tuner.
Bass speaker cabinets often have two 1/4" jacks. These are provided so that one speaker cable can be plugged into the first jack and connected to the power amp; if the bassist wants to use a second cabinet, a second speaker cable is plugged into the second jack and then into second speaker.
A small number of bass amps designed for the upright bass have both a 1/4" input for a piezoelectric pickup and an XLR input for a condenser microphone mounted on the bass, with a simple audio mixer for combining the two signals, as described below.
More expensive amps may also have LEDs to indicate when the preamp has a signal present from the instrument; when a limiter or similar speaker protection feature is activated; when clipping is occurring; or when the amp is in standby mode.
Double bass players performing in genres where the bass is Slap bass, either by pulling the string until it snaps back onto the fingerboard or striking the strings, such as traditional blues, rockabilly, psychobilly jazz, folk, and Bluegrass music often blend the sounds picked up by a piezoelectric transducer with the sounds picked up by a small condenser microphone mounted on the bridge. The microphone picks up the resonance coming from the body and the sounds of the strings being plucked, bowed, or slapped. The two sound signals are blended using a simple Mixing console and then routed to the amplifier.
While many upright bass players use combo amplifiers, bassists in genres that use high stage volume, such as the punk-rockabilly genre of psychobilly use "bass stacks". Some jazz bassists and other bass players who play in small venues use specialized, expensive upright bass amps, like the Acoustic Image combo amplifier.
Double bass players playing in genres where a louder amplified tone (emphasizing the fundamental frequencies) is desired may encounter audio feedback. Feedback for double bass generally manifests itself as a sharp, sudden high-volume "howling" sound that can damage loudspeakers. When acoustic instruments with resonant bodies are amplified with microphones and piezoelectric transducer pickups, they are prone to have feedback problems. For acoustic bass guitars, soft plastic discs are available to block the instrument's sound holes, thus reducing feedback. Upright bass players sometimes use homemade foam inserts to fill in the "f" holes.
A range of other effects are used in various genres. "Wah-wah" and "synth" bass effects are associated with funk music. As well, since the 1960s and 1970s, bands have experimented with "fuzz bass" where the bass is distorted either by overdriving the amp or by using a distortion unit. Fuzz bass was used by psychedelic rock bands in the 1960s and early 1970s and in traditional heavy metal bands (Led Zeppelin) during the same era. Octave-generating effects, which generate an octave below the pitch being played are also used by bass players. Many bassists in modern-day hard rock and heavy metal bands use overdrive pedals specifically made for bass guitar. Since the late 1980s, bass-specific overdrive pedals have been available; these pedals maintain the low fundamental pitch. Using a regular guitar distortion pedal for bass would result in the lower frequencies being greatly lessened. Well-known overdrive effects for bass include the Boss Corporation[1], Electro-Harmonix[2], Tech21 Sansamp Bass Driver[3][4], the DigiTech[5], and the Big Muff.
The 75 Watt Fender Rumble 75 Bass Combo Amp and its 150 Watt and 300 Watt counterparts can produce an overdrive effect by using the gain and blend controls, giving overdrive sounds ranging from "mellow warmth to heavy distorted tones". The Fender SuperBassman is a 300-watt tube head which has a built-in overdrive channel. The Fender Bronco 40 includes a range of effects including modern bass overdrive, vintage overdrive and fuzz. The MESA Bigblock 750 has a built-in overdrive channel. The Mesa M2000 has a high gain switch which can be engaged with a footswitch. The Marshall MB450 head and combo bass amplifiers have a tube pre-amp on the "Classic" channel which can be overdriven. The Ashdown ABM 500 EVO III 575W Bass amp head has a built-in overdrive effect. Overdrive is also available on many Crate bass amplifiers. The Yamaha BBT500H has three types of built-in drive effects: overdrive, distortion and fuzz. The Ampeg B5R Bass Amplifier has two channels: clean and overdrive, with the ability to combine the two. Verellen, a boutique amp company, produces a bass amplifier with a built in overdrive channel.
Another way of categorizing bass equipment manufacturers is by which part of the market they are targeting. While Peavey and Yorkville products are aimed at the generalist mass market, some bass equipment manufacturers, such as Acoustic Image or Walter Woods make expensive "boutique" equipment that is aimed at a niche market within the professional musician market. Acoustic Image amplifiers and speaker cabinets tend to be used by professional acoustic folk and jazz musicians, and Walter Woods amplifiers are associated with professional acoustic jazz bass players.
While electric bass players have used regular in large concerts since the 1960s, this is usually just for the higher register; a bass amp is still typically used for the low register, because regular guitar amps are only designed to go down to about 80 Hz. One of the reasons bassists split their signal into a bass amp and an electric guitar amp is because this arrangement enables them to overdrive the higher-register sound from the electric guitar amp, while retaining the deep bass tone from the bass amp. Naturally-produced overdrive on bass obtained by cranking a tube amplifier or solid-state preamplifier typically results in a loss of bass tone, because when pushed into overdrive, a note goes to the upper octave second harmonic.
Bass players who do not have a combo amp who are playing live shows can connect their bass to a DI unit and from there to the PA system. In a well-equipped nightclub or music bar, the audio engineer can then route the bass signal to a stage monitor suitable for bass, so the bass player and band can hear the bass tone. Some standalone bass preamplifier pedals have a DI output, so this output can similarly be connected to a PA system. Bass players who are playing in small venues (, small , etc.) will typically need to bring their own bass combo amp (or an alternative amp, such as a keyboard amp combo), because very small venues often have a very small, low-powered PA system which is used mainly for vocals. Some small venues do not have monitor speakers, or they have only one, in front of the lead vocalist. Bass players who do not have a combo amp who are laying down tracks in the recording studio can plug into a DI unit (any professional recording studio will have one), which is connected to the audio console; the audio engineer can provide the bassist with the sound of their instrument through headphones.
|
|
